DIN 11864 DIN11865 & DIN11851 DIN11852

This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical and pharmaceutical industries. 

Three designs of pipe fittings have been tailored to accept 2 different styles of aseptic seals that effect a smooth interface within the pipe work whilst simultaneously achieving a metal to metal seat behind the joint.

The seal sections used are referenced as “Form A” and “Form B” and both have distinctive profiles that are easily recognised.  Form A is an O Ring Joint whilst Form B is a 2-part Square seal with a secondary internal diamond section and is not commercially available.

This design of fitting is based on the DIN 11851 Hygienic Screwed Milk Union.

This firmly established industry standard union was used as the basis for the design upgrade where an Aseptic Joint replaced the convention D Section Seal. 

The new design was initially referred to as the DIN 11853 Aseptic Screwed Union before finally being included as the first of the 3 new sections of the DIN 11864 standard.

Available with optional lengths to suit Orbital and Manual Welding, these unions have been designed to match tube and pipe specifications in DIN 11850; ASME BPE 2022 and BS 4825 Part 1 and also ISO 1127 for schedule pipe.

Materials: 316L SS

Related standards:

DIN 11864-1 Form A – Aseptic Screwed Union

DIN 11864-2 Form A – Aseptic Flange Union

DIN 11864-3 Form A – Aseptic Clamp Union

DIN 11866 / 11850 / 11865

DIN11866-Table B / ISO 1127

BS 4825 /ASME BPE 2022

DIN 11853 (Type 1 only)